3D Optical Profilers
Position Metrology Systems
Custom Metrology Solutions
Trade-in & Upgrade Program
Applications Form & Roughness of Precision Parts Form, Waviness, Roughness Surface Finish Regions Analysis New! Tribology Automated Image Inspection Step Height Thin Film Measurement Transmitted Wavefront Radius of Curvature Optical Homogeneity Position & Angle Measurement
Form & Roughness of Precision Surfaces – Fuel Injectors
As these injectors now operate above 40,000 psi, sealing surfaces are required to be metal-to-metal as any non-metallic material would be simply blown out. These sealing surfaces need to maintain very high flatness with super finishing, a process which creates extremely low surface roughness.
As the sealing surfaces are critical to the performance and lifetime of the injector, typical contact metrology cannot be utilized as the stylus could mar the surface during measurement causing a leak path when the injector is under pressure. Non-contact is the most viable option for injector metrology.
Precision Surface Roughness Metrology Applications...
Inquiry FormPlease use the form below to contact us with any questions you have regarding measurement of form & roughness of fuel injectors, or any other ZYGO metrology applications.
** You may withdraw this consent at any time using the "unsubscribe" link at the bottom of any page on this web site.
× Enter the email address you would like to unsubscribe from future contact...