3D Optical Profilers
Position Metrology Systems
Custom Metrology Solutions
Trade-in & Upgrade Program New!
Applications Form & Roughness of Precision Parts Form, Waviness, Roughness Surface Finish Regions Analysis New! Tribology Automated Image Inspection Step Height Thin Film Measurement Transmitted Wavefront Radius of Curvature Optical Homogeneity Position & Angle Measurement
Thin Film Measurement Precise, reliable, characterization of thin film topography and thickness, and substrate topographythin film measurement and analysis technologies available on ZYGO's 3D optical profilers.
Advanced Model Based Analysis (MBA) is the most advanced CSI-based thin film measurement technique available from ZYGO, and works by comparing a theoretical model of the sample film stack to an actual measurement signal as seen by the profiler. This patented technology simultaneously measures topography, thickness, and substrate topography for single layer films from 50 – 2000 nm in seconds. In addition to thin film characterization, MBA technology can be used to perform true topography measurements of dissimilar materials by adjusting for the phase change on reflection (PCOR) that occurs in these situations.
Standard Film Analysis (LSQ) is used to measure film thickness and substrates of films from 1 – 150 µm optical thickness, as well as the top surface of films from 0.4 – 150 µm. Thick film metrology works by isolating the interference signals that are created by the multiple material interfaces and require only basic knowledge of the film's index of refraction.
Because they are based on CSI technology, there are several advantages that MBA and LSQ thin film measurement technologies provide compared to other techniques:
• 3D areal surface maps provide context for understanding a process that cannot be observed when film metrology is reduced to a single thickness number.
• Film measurement is performed through-the-lens, which helps to ensure that the region of interest is exactly the region profiled.
• No additional hardware is required for most applications of MBA or LSQ thin film measurement.
Inquiry FormPlease use the form below to contact us with any questions you have regarding thin film measurement and characterization, or any other ZYGO metrology applications.
Note: If you experience any difficulty submitting this form, please contact: firstname.lastname@example.org
Contact ZYGO today to learn more about thin film measurement and characterization!