When looking at metrology, general discussion often revolves around the relative merits of contact or non-contact measurement solutions. There is now a drive across nearly all industries for smaller and more complex components (which are often prone to contamination or damage by even the slightest contact with a probe). For these exacting applications, non-contact optical metrology solutions, or touchless dimensional measurement devices, are typically the best fit with their extreme precision and measurement repeatability - vital characteristics when nanometers can make the difference between pass and fail.

Typically, non-contact optical metrology solutions cause no damage to the parts being measured and are also much faster than contact systems. This is ideal when the requirement is for high sampling rates of complex products. In addition, 3D optical metrology tools may be incorporated "in process", which is where the future of metrology exists in advanced manufacturing scenarios. Measurement systems are moving from dedicated metrology rooms or the quality control department closer to, or – in some cases – onto the production floor.

It is difficult to argue that any alternative metrology solution is close to 3D optical metrology when it comes to the evaluation of a vast number of data points quickly and with precision. In a world where manufacturers increasingly require greater functionality with minimal cost and effort, 3D optical metrology solutions are critical to competitiveness.

In some sectors, there is still a reluctance to deploy optical measurement systems, which is based in part on misconceptions about reliability, lack of experience, or because outdated metrology tools are confused with the next generation optical metrology solutions available today. Recent advances in optics, computers, high-resolution sensors, and data processing capabilities have made optical metrology a standard in industry sectors such as consumer electronics, semiconductor, automotive, medical, and aerospace.

Using 3D Metrology for Process Control

For many manufacturers, quality control is key to cost-effective and efficient manufacturing, and sub-standard metrology solutions have real cost implications. Because of this, optimum quality management systems are key to competitive success. Increasingly, the demand is for automated, non-contact metrology systems as part of a production line where high frequency part inspection is required. In addition, there is a growing emphasis on traceability, increased productivity, and global expansion which necessitates making important production decisions from geographically distributed manufacturing facilities.

Because of these demands, the industry requires precise, accurate metrology on all parts produced. 3D optical metrology solutions provide the ability to fulfill such exacting process control requirements.

Today’s Optical Metrology Systems

Today’s optical metrology systems exist at the ultra-precise end of the measurement spectrum, aimed specifically at high-value applications in semiconductor lithography, consumer electronics, optical testing, and precision manufacturing. In all these areas, high performance three-dimensional metrology is the key to process development and manufacturing yield.

The key demand from users of high-precision metrology tools is for greater data density in ever more complex applications. This metrology is often to be undertaken in extremely difficult environments, where traditional metrology tools would struggle to operate efficiently due to vibration or turbulence. In addition, extracting the maximum data possible from each scan is critical to enabling superior metrology on the widest range of samples.

Today’s technologies help to bring the instruments closer to the production floor and facilitate measurement of virtually any surface from the very smooth, to the very rough, and from very flat to highly sloped, stimulating in-process metrology applications.

How Metrology Ensures Quality in Smart Phones

One perfect example of industry demand for high accuracy metrology with greater data density is in the manufacture of mobile phones, which has metrology needs across the component spectrum. Applications that include camera modules, flexible circuits, and the phone body and cover glass all require critical metrology.

Lenses

Camera lenses used in smart phones typically consist of several aspheric elements. The manufacturing yield for a smart phone lens assembly depends not only on the shape of these complicated aspheres, but on the various built-in features that allow individual lenses to fall into alignment when assembled in a lens barrel.

As cameras increase in image quality, tolerances of lens designs become tighter, and at the same time characterization requirements become broader. Increasingly complex camera designs require complex surface geometries. With approximately 40 million micro lenses manufactured every day, there is critical demand for fast, high-quality, reliable metrology to support this scale of precision manufacturing.

Lens manufacturers require as much information as possible about the surfaces and the interlocking alignment features quickly and with high confidence. For this application, ZYGO developed its Compass™ 3D optical profiler system, which combines interference microscopy, multi-axis staging, and software for evaluating lens molds as well as individual production lenses.

Figure 1. A typical Compass™ texture map of a full mobile phone camera lens mold pin

Through full-surface 3D metrology, the Compass™ system characterizes these complex surfaces without compromising precision or accuracy, and can identify defects such as deviation from design and process asymmetries or manufacturing errors that would otherwise be missed, and which would be detrimental to lens performance and image quality. Identifying and quantifying defects can give manufacturers valuable insight about their processes.

Flexible Circuits

Many of the internal components of a modern smart phone are connected using flexible circuits in order to save space, weight, and energy consumption. These circuits pack a large quantity of connections into a small area, and minor flaws in a relatively small, inexpensive component can result in a completely unusable high-value device.

Flex Circuit Measurement
Figure 2. Flexible circuit microelectronics are inspected to verify proper feature height, width, spacing, and continuity using ZYGO's ZeGage™, NewView™, and Nexview™ optical profilers.

It is important to evaluate the critical lateral dimensions and topography of the components (usually electrical traces) used in such flexible circuits. Historically this would have been done using two separate metrology systems, but ZYGO optical profilers are able to combine both lateral and vertical metrology tasks into a single, automated solution. This saves time as well as valuable real estate in the factory and enables more efficient workflow.

Mechanical Components

Mechanical components such as the barrels that camera lenses are mounted into, or the outer housings that contain all the various parts of a mobile phone also have critical metrology needs that include topography features, lateral dimensions, and surface finish. Surface finish is key for cosmetic parts that need to maintain a consistent look across devices, especially when they may be made in various locations and even by multiple vendors. ZYGO instruments like the NewView™ 9000, Nexview™ NX2, and ZeGage™ Pro 3D optical profilers are deployed into applications of R&D, manufacturing, and quality control to monitor parameters such as these.

Figure 3. CSI measures texture on a variety of materials and surface finishing techniques including (left) diamond turning, (center) grinding, and (right) polishing.

In addition, ZYGO's proprietary Mx™ software – which powers all its optical metrology instruments – provides a full suite of measurement results which would typically require 2 or 3 conventional metrology instruments to replicate. The rapid growth of advanced manufacturing technology in consumer electronics requires metrology instruments that work at the speed of the industry. Consumer electronics products will only grow more complex over time, so having a versatile, precise, and powerful surface metrology system available is key to whatever comes next.

Looking Ahead

Increasingly, manufacturers require the reliable measurement of complex or difficult to measure parts and components, and non-contact optical metrology solutions are the only viable solutions in terms of accuracy and cost-effective results.

The shift towards in-process automated metrology is also a driver behind the uptake of optical metrology tools, but OEMs need to be aware that not all optical measurement solutions are the same. It is vital that any technology solution provider can provide metrology tools that can fulfill the sub-nanometer accuracy and repeatability requirements of today's cutting edge industrial applications.

Contact ZYGO today to learn more.